■No cable connection change required during all multi-band tests ■Easy Frequency Selection (User-friendly GUI Interface) ■Auto Test Module for Individual, Combined Frequencies (Optional) ■Test all ports by one-time cable connection ■Any Frequency Combination Available |
■ The following details are ready-made products.
■ Can be manufactured and developed according to customer's requirements.
■Common Specifications
Conventional Method |
Test Method |
Multi-Band PIM Tester |
Multiple connections, complex test sequencing |
Test Frequency Change |
One Time Setup, User-friendly GUI Interface |
High |
CAPEX |
Minimum 30% Decrease |
High |
OPEX |
Minimum 30% Decrease |
30 Min. |
Test Time |
10 Min. |
Frequency Band |
|||
700 Lower ABC |
700 Upper C |
EGSM 900 |
Cell 850 |
DCS 1800 |
PCS 1900 |
UMTS 2100 |
LTE 2600 |
Amp Tray |
|||
Power Level |
30 - 44dBm (1.0dB Step) [Initial setting 43dBm,
Optional 46dBm] |
||
Display Power Accuracy |
±0.3dB |
||
ALC Accuracy |
±0.3dB |
||
Input Power |
AC 100 - 240V |
||
Operating Temperature |
0 - 65℃ |
||
Size |
482.6 ×
132.0 × 498.0 mm (Width ×
Height × Depth) |
||
Connector |
N Type, 8Pin Circular, BNC Connector |
||
Filter Tray |
|||
Any frequency Combination Available |
|||
Size |
482.6 ×
132.0 × 498.0 mm (Width ×
Height × Depth) |
||
Connector |
N Type, 8Pin
Circular, BNC Connector |
||
S/A Board |
|||
Average Noise Floor |
-140dBm |
||
IM Measure |
-162dBc |
||
Warm-up Time |
1Minutes |
||
Size |
482.6 ×
88.0 × 503.00 mm (Width ×
Height × Depth) |
||
Connector |
N Type, 8Pin Circular, BNC Connector |
||
Tilt Tray |
|||
AISG 2.0 Complement |
|||
Size |
482.6 ×
43.6 × 503.00 mm (Width ×
Height × Depth) |
||
Connector |
RET, 8Pin Circular Connector |
FAMILY SITE